Fundamental electrical engineering concepts and theory
Power factor is the ratio between the real power (P in kW) and apparent power (S in kVA) drawn by an electrical load. The reactive power (Q in kVAr)...
When selecting a cable, the performance of the cable under fault conditions is an important consideration. It is important that calculations be carried...
A recurring theme on our forums is cable sizing. Now many installations are unique and require special consideration. However, a lot of the time things...
Before the technical, some general information. E-ink display are found in a lot of e-readers, some mobile phones and similar devices and the intent is...
Many questions sent in to the site are in connection with motor starting and in particular star-delta. For all but the simplest application, there is...
Request to look at induction motor starting time have come up a few times on the site. Hopefully in this post, I give you guys some idea on how to calculate...
I was reminded of Occam's Razor while reading a book. It's quite a simple principal of logic which has stood the test of time and is accepted as central...
This article gives an introduction to IEEE 485 method for the selection and calculation of battery capacity.
Sometimes it’s useful to be able to quickly lookup a piece of technical information. This note is a collection of information related to motors, and in...
From the earliest times, humans have found ways to create light. Pre-historic peoples used natural materials (moss, grass, etc.) soaked in animal fat and...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.