Fundamental electrical engineering concepts and theory
Over the past year or so I've been involved in on going discussions related to referring fault levels from the secondary of a transformer to the primary...
Using software in our work is essential for most of us and we are becoming even more dependant on it's use. While software is a great asset, many times...
In a previous article I looked at the dc resistance of conductors and in this article we turn our attention to ac resistance. If you have not read the...
Working in the vicinity of electrical equipment poses an hazard. In addition to electric shock hazard, fault currents passing through air causes Arc Flash...
Gauss's Electrical law defines the relation between charge ("Positive" & "Negative") and electric field. The law was initially formulated by Carl Friedrich...
This is the second post in a series of two on periodic electrical inspections. In the first post, I discussed how often inspections should be carried out...
This article gives an introduction to IEEE 485 method for the selection and calculation of battery capacity.
Depending where in the world you work, you are likely following one of two standards International Electrotechnical Commission (IEC) National...
Most installations involve some form of lightning protection system which is connected to an earth electrode. The function of the earth electrode is to...
Many questions sent in to the site are in connection with motor starting and in particular star-delta. For all but the simplest application, there is...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.