Fundamental electrical engineering concepts and theory
Sometimes it’s useful to be able to quickly lookup a piece of technical information. This note is a collection of information related to motors, and in...
The image (reproduced from IEC 60909) shows a typical fault in an ac system. From the illustration it can seen that there is an initial dc component ...
Power factor is the ratio between the real power (P in kW) and apparent power (S in kVA) drawn by an electrical load. The reactive power (Q in kVAr)...
While there are a vast array of cable insulation materials, these are often divided into two general types; Thermoplastic or Thermosetting. For example...
If you have a great idea or invent something the last thing you want is someone to steal the idea. One of the things you can do is protect the intellectual...
‘Kept looking at a card, y’see? Kept looking at it. Welcome back Bottle. Gods below welcome home. The Crippled God A Tale of the Malazan Book of the...
Various techniques exist to enable the correct selection of batteries for UPS applications. The procedure described below is one of the more common. ...
When selecting a generator, there are inherent limits on the active and reactive power which can be delivered. Generators are normally sized for a certain...
When selecting a cable, the performance of the cable under fault conditions is an important consideration. It is important that calculations be carried...
Over the past year or so I've been involved in on going discussions related to referring fault levels from the secondary of a transformer to the primary...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.