Electrical and related buildings technology
This is the second post in a series of two on periodic electrical inspections. In the first post, I discussed how often inspections should be carried out...
A single phase system is perhaps the most common type of system most people are familiar with. This is what people have in their homes and what appliances...
Before the technical, some general information. E-ink display are found in a lot of e-readers, some mobile phones and similar devices and the intent is...
If you want to check a circuit is dead (not live), you should always use the three point method. First check a known live circuit, then check the dead...
The fundamental component of any analogue computer is the operational amplifier, or op amp. An operational amplifier (often called an op-amp,) is a high...
I'm a fan of using manufacturers catalogues. There are two main reasons for this. Firstly, if your involved in the purchase of equipment, you will likely...
There are a lot of interesting two page type notes on various medium voltage topics – switchgear, circuit breakers, bus systems etc. It is on the Siemens...
Reading is a bit of a hobby of mine and I"ve done a few off-topic posts in the past on this. Rather than continue doing the occasional post I thought ...
Most installations involve some form of lightning protection system which is connected to an earth electrode. The function of the earth electrode is to...
One of the fundamental requirements of an alternating current distribution systems it to have the ability to change the magnitude of voltages. It is more...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.