E-Ink
Before the technical, some general information. E-ink display are found in a lot of e-readers, some mobile phones and similar devices and the intent is...
How to Calculate Motor Starting Time
Request to look at induction motor starting time have come up a few times on the site. Hopefully in this post, I give you guys some idea on how to calculate...
Understanding electric motor insulation & temperature
Anyone specifying or using electric motors should have a basic understanding how the insulation is related to temperature. Three classes of insulation...
UPS Battery Sizing
Various techniques exist to enable the correct selection of batteries for UPS applications. The procedure described below is one of the more common. ...
Harmonised Cable Codes and Colours
Within Europe the European Committee for Electrotechnical Standardization (CENELEC) has standardised the both the designation and colour of cables. ...
Low Voltage Fault Tables
The following tables provide quick order of magnitude fault levels for a a range of typical low voltage situations.
Battery Sizing
This article gives an introduction to IEEE 485 method for the selection and calculation of battery capacity.
Three Phase Current - Simple Calculation
The calculation of current in a three phase system has been brought up on our site feedback and is a discussion I seem to get involved in every now and...
IEEE Winds of Change
IEEE TV has a part series of videos on wind power and it's implication. For a really good overview to the technologies and issues around wind power, these...
Surface Treatment – Ladders, Trays and Baskets
Steel ladders, trays and baskets form the backbone of cable containment systems. Often these items need some form of surface treatment to prevent corrosion...