Current transformers (CTs) are used to convert high level currents to a smaller more reasonable level for use as inputs to protection relays and metering...

Reading is a bit of a hobby of mine and I"ve done a few off-topic posts in the past on this. Rather than continue doing the occasional post I thought ...

In a previous article I looked at the dc resistance of conductors and in this article we turn our attention to ac resistance. If you have not read the...

Capacitors are widely used in electrical engineering for functions such as energy storage, power factor correction, voltage compensation and many others...

When sizing cables, the heat generated  by losses within any sheath or armour need to be evaluated. When significant, it becomes a factor to be considered...

When selecting a cable, the performance of the cable under fault conditions is an important consideration. It is important that calculations be carried...

This is the second post in a series of two on periodic electrical inspections. In the first post, I discussed how often inspections should be carried out...

Cable insulation is used to provide electrical separation between conductors of  a cable.  During the historical development of cables, numerous types...

At the beginning of the year China put the world's first 1,000 kV UHV transmission system into operation. Transmitting power at over a million volts is...

Within Europe the European Committee for Electrotechnical Standardization (CENELEC) has standardised the both the designation and colour of cables.   ...