Electrical and related buildings technology
When sizing cables, the heat generated by losses within any sheath or armour need to be evaluated. When significant, it becomes a factor to be considered...
The (relatively new) switchgear and control gear standard, IEC 61439 'Low-voltage switchgear and controlgear assemblies' has three methods which can be...
This is the second post in a series of two on periodic electrical inspections. In the first post, I discussed how often inspections should be carried out...
When selecting a cable, the performance of the cable under fault conditions is an important consideration. It is important that calculations be carried...
I have been thinking recently that there appears to be less professional integrity around than when I first started my career in electrical engineering...
A battery consists of one or more cells, each of which use stored chemical energy to produce electrical energy, There are many types of cells and these...
Induction motors are frequently used in both industrial and domestic applications. Within the induction motor, an electrical current in the rotor is induced...
If you are working on a large plan, get the real coordinates [latitude, longitude] for two or more points and add them to the drawing. That way you can...
I think this post is going to be helpful to several of our readers. While the IEC low voltage circuit breaker Standard [IEC 60947-2, Low voltage switchgear...
These lifts were first built in 1884 by J. E. Hall and called a paternoster ("Our Father", the first two words of the Lord's Prayer in Latin) due to its...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.