Fundamental electrical engineering concepts and theory
When selecting a cable, the performance of the cable under fault conditions is an important consideration. It is important that calculations be carried...
Fault calculations are one of the most common types of calculation carried out during the design and analysis of electrical systems. These calculations...
Traditionally generation of electricity has involved rotating machines to produce alternating sinusoidal voltage and current (a.c. systems). With the development...
Over the past year or so I've been involved in on going discussions related to referring fault levels from the secondary of a transformer to the primary...
This is the first of two posts on the resistance of conductors. In the next post I will look at the ac resistance, including skin effect and we deal with...
When selecting a generator, there are inherent limits on the active and reactive power which can be delivered. Generators are normally sized for a certain...
One of the fundamental requirements of an alternating current distribution systems it to have the ability to change the magnitude of voltages. It is more...
I've been considering a blog on the 110 or 230 Volt issue for a while. While browsing the Internet I came across a great summary by Borat over at engineering...
Here’s list of some famous scientists. Deliberately short, with the aim to provide a quick memory jog or overview. If your looking for more detailed information...
If you want to check a circuit is dead (not live), you should always use the three point method. First check a known live circuit, then check the dead...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.