Fundamental electrical engineering concepts and theory
Reading is a bit of a hobby of mine and I"ve done a few off-topic posts in the past on this. Rather than continue doing the occasional post I thought ...
When making adding a Note to our site we have a great online WYSIWYG editor and things are pretty simple. However, if you prefer you can write, manage...
Our IEE cable sizing was wrote a few years ago and had become rough around the edges. I thought it was time to give the tool a service. Unfortunately when...
The (relatively new) switchgear and control gear standard, IEC 61439 'Low-voltage switchgear and controlgear assemblies' has three methods which can be...
Installation of a UPS can help in reducing problems due to issues with the power supply. A lot of people relate this to nine key issues. Depending on...
I've been considering a blog on the 110 or 230 Volt issue for a while. While browsing the Internet I came across a great summary by Borat over at engineering...
Various techniques exist to enable the correct selection of batteries for UPS applications. The procedure described below is one of the more common. ...
IEEE TV has a part series of videos on wind power and it's implication. For a really good overview to the technologies and issues around wind power, these...
Years ago I was told that you should always try to write the best report you can. Many years later I still think on this as one of the better pieces of...
If you want to check a circuit is dead (not live), you should always use the three point method. First check a known live circuit, then check the dead...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.