Fundamental electrical engineering concepts and theory
The widely used United Sates standard ANSI/IEEE C37.2 'Electrical Power System Device Function Numbers, Acronyms, and Contact Designations' deals with...
This is the second post in a series of two on periodic electrical inspections. In the first post, I discussed how often inspections should be carried out...
Using software in our work is essential for most of us and we are becoming even more dependant on it's use. While software is a great asset, many times...
Control theory looks at how systems work and are controlled from a mathematical view. This note gives a brief introduction to some of the concepts – more...
Our IEE cable sizing was wrote a few years ago and had become rough around the edges. I thought it was time to give the tool a service. Unfortunately when...
Various techniques exist to enable the correct selection of batteries for UPS applications. The procedure described below is one of the more common. ...
The calculation of current in a three phase system has been brought up on our site feedback and is a discussion I seem to get involved in every now and...
Induction motors are frequently used in both industrial and domestic applications. Within the induction motor, an electrical current in the rotor is induced...
Power factor is the ratio between the real power (P in kW) and apparent power (S in kVA) drawn by an electrical load. The reactive power (Q in kVAr)...
myElectrical does not support or promote the use of copyrighted material without the copyright owner's consent. If you believe that material for which...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.