Fundamental electrical engineering concepts and theory
Following on from my post on railway electrification voltages, I thought an introduction to traction substations would be a good idea. Traction substations...
Power factor is the ratio between the real power (P in kW) and apparent power (S in kVA) drawn by an electrical load. The reactive power (Q in kVAr)...
Modelica is an open source (free) software language for modelling complex systems. Having never used it before, I thought I would download a development...
I think this post is going to be helpful to several of our readers. While the IEC low voltage circuit breaker Standard [IEC 60947-2, Low voltage switchgear...
Using software in our work is essential for most of us and we are becoming even more dependant on it's use. While software is a great asset, many times...
Depending where in the world you work, you are likely following one of two standards International Electrotechnical Commission (IEC) National...
This is the first of two posts on the resistance of conductors. In the next post I will look at the ac resistance, including skin effect and we deal with...
Cable insulation is used to provide electrical separation between conductors of a cable. During the historical development of cables, numerous types...
Most installations involve some form of lightning protection system which is connected to an earth electrode. The function of the earth electrode is to...
Reading is a bit of a hobby of mine and I"ve done a few off-topic posts in the past on this. Rather than continue doing the occasional post I thought ...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.