Power systems theory - generation, transmissions and distribution
Cable insulation is used to provide electrical separation between conductors of a cable. During the historical development of cables, numerous types...
Our question and answer system while letting you do exactly what it says, is much more. It is a dynamic user driven system, where our users not only ask...
The other day I came across an article in Technology Review on the development of a smart transformer. A professor at North Carolina State University is...
In a previous article I looked at the dc resistance of conductors and in this article we turn our attention to ac resistance. If you have not read the...
A frequent problem in fault calculations is the obtaining of equipment parameters. While it is always preferable to use the actual parameters of the equipment...
Straight forward list of some common motor faults. If I have missed any other common faults, please take a bit of time to add them in as a comment below...
This article gives an introduction to IEEE 485 method for the selection and calculation of battery capacity.
Using software in our work is essential for most of us and we are becoming even more dependant on it's use. While software is a great asset, many times...
If you are working on a large plan, get the real coordinates [latitude, longitude] for two or more points and add them to the drawing. That way you can...
If you are wondering what happened to our cable notes, the short answer is that we have moved them to myCableEngineering.com. The "Knowledge Base" at...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.