Electrical and related buildings technology
Control theory looks at how systems work and are controlled from a mathematical view. This note gives a brief introduction to some of the concepts – more...
Problems on achieving maximum voltage drop within an installation come up often. Depending where you live, local regulations will have different limits...
A load flow study is the analysis of an electrical network carried out by an electrical engineer. The purpose is to understand how power flows around...
The fundamental component of any analogue computer is the operational amplifier, or op amp. An operational amplifier (often called an op-amp,) is a high...
A single phase system is perhaps the most common type of system most people are familiar with. This is what people have in their homes and what appliances...
A fundamental concept behind the operation of alternating current systems is that voltage and current waveforms will be sinusoidal – a Sine Wave. This...
When sizing cables, the heat generated by losses within any sheath or armour need to be evaluated. When significant, it becomes a factor to be considered...
Depending where in the world you work, you are likely following one of two standards International Electrotechnical Commission (IEC) National...
Insulation on a motor prevents interconnection of windings and the winding to earth. When looking at motors, it is important to understand how the insulation...
I'm a fan of using manufacturers catalogues. There are two main reasons for this. Firstly, if your involved in the purchase of equipment, you will likely...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.