Why use catalogues 

By on

I'm a fan of using manufacturers catalogues. There are two main reasons for this.

Firstly, if your involved in the purchase of equipment, you will likely need to look into catalogues to find what you need. If your involved in design or specification you should also be looking into catalogues. I'm a big believer that any engineer should not be specifying an item of equipment unless they have at least one product in mind which would fit the bill. Unfortunately this is not always the case and often equipment as detailed on drawings or specifications is not readily available as a standard device which the contractor can buy; leading to all sorts of problems.

Secondly, catalogues can be great source of technical information and learning. In contrast to a theoretical texts, catalogues by nature deal with an actual product and in a very practical sense. A lot of the information you get from reading catalogues this is just the type of information you need to be able to incorporate the product into your project in a way that works.

I'm not a great collector of paper or book, so while I use catalogues regularly I don't keep that many at hand. Google is pretty good at quickly finding the latest version of a catalogue. Failing that, spending a bit of time on a manufacturer's website can yield results.

I do have around ten hard copy catalogues I keep near by. These are ones I would use pretty regularly. Having these close at hand helps if colleagues arrives with questions - it's easy to show some real live examples of products.



Steven McFadyen's avatar Steven McFadyen

Steven has over twenty five years experience working on some of the largest construction projects. He has a deep technical understanding of electrical engineering and is keen to share this knowledge. About the author

myElectrical Engineering

comments powered by Disqus

  1. tagwireyiu's avatar tagwireyiu says:
    2/28/2012 4:30 PM

    the site is good will keep in touch.


Comments are closed for this post:
  • have a question or need help, please use our Questions Section
  • spotted an error or have additional info that you think should be in this post, feel free to Contact Us



Are We Losing Professional Integrity

I have been thinking recently that there appears to be less professional integrity around than when I first started my career in electrical engineering...

Earth Electrode Resistance

Earthing of electrical systems is essential for the correct functioning and the protecting of life and equipment in the event of faults.  The earth electrode...

Medium Voltage Switchgear Room Design Guide

Many medium voltage (MV) indoor switchgear rooms  exist worldwide. The complexity of these rooms varies considerably depending on location, function and...

Cable Sizing Tool

Our cable sizing tool is one of the more popular tools on the site.  The tool enables cables to be sized in compliance with BS 7671 (the IEE Wiring Regulations...

Low Voltage Circuit Breakers

Circuit breakers are switching devices whose primary function is to isolate parts of an electrical distribution system in the even of abnormal conditions...

Cable Insulation Properties

Cable insulation is used to provide electrical separation between conductors of  a cable.  During the historical development of cables, numerous types...

Introduction to Current Transformers

Current transformers (CTs) are used to convert high level currents to a smaller more reasonable level for use as inputs to protection relays and metering...

Lightning Protection and Earth Electrode Resistance

Most installations involve some form of lightning protection system which is connected to an earth electrode.  The function of the earth electrode is to...

Inductance

When current flows within a wire, a magnetic field is created. The potion of this magnetic field perpendicular to the wire is called the magnetic flux...

Why is electricity so hard to understand?

It's been a busy few months on different projects or busy couple of decades depending on how I look at it. I can say that on the odd (frequent) occasion...

Have some knowledge to share

If you have some expert knowledge or experience, why not consider sharing this with our community.  

By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.

To get started and understand our policy, you can read our How to Write an Electrical Note.