Fundamental electrical engineering concepts and theory
The correct sizing of current transformers is required to ensure satisfactory operation of measuring instruments and protection relays. Several methods...
A fundamental concept behind the operation of alternating current systems is that voltage and current waveforms will be sinusoidal – a Sine Wave. This...
"I can live with doubt and uncertainty and not knowing. I think it is much more interesting to live not knowing than to have answers that might be wrong...
Various techniques exist to enable the correct selection of batteries for UPS applications. The procedure described below is one of the more common. ...
Power factor is the ratio between the real power (P in kW) and apparent power (S in kVA) drawn by an electrical load. The reactive power (Q in kVAr)...
Request to look at induction motor starting time have come up a few times on the site. Hopefully in this post, I give you guys some idea on how to calculate...
If you are working on a large plan, get the real coordinates [latitude, longitude] for two or more points and add them to the drawing. That way you can...
In three phase systems, the use of transformers with three windings (or legs) per side is common. These three windings are often connected in delta or...
Control theory looks at how systems work and are controlled from a mathematical view. This note gives a brief introduction to some of the concepts – more...
The International System of Units (abbreviated SI) is the world's most widely used system of units. The system consists of a set of units and prefixes...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.