Fundamental electrical engineering concepts and theory
The IEC publishes a series of documents and rules governing the preparation of documents, drawings and the referencing of equipment. Depending on country...
This is the second post in a series of two on periodic electrical inspections. In the first post, I discussed how often inspections should be carried out...
For unbalance conditions the calculation of fault currents is more complex. One method of dealing with this is symmetrical components. Using symmetrical...
A quick post in connection with an email question: Live Tank - the circuit breaker the switching unit is located in an insulator bushing which is live...
If your are ever called out to troubleshoot something on your electrical system, one of the first things consider is the supply voltage. You want to ensure...
In a previous article I looked at the dc resistance of conductors and in this article we turn our attention to ac resistance. If you have not read the...
Various techniques exist to enable the correct selection of batteries for UPS applications. The procedure described below is one of the more common. ...
If two dissimilar metals are touching and an external conducting path exists, corrosion of one the metals can take place. Moisture or other materials...
Many questions sent in to the site are in connection with motor starting and in particular star-delta. For all but the simplest application, there is...
I'm a fan of using manufacturers catalogues. There are two main reasons for this. Firstly, if your involved in the purchase of equipment, you will likely...
If you have some expert knowledge or experience, why not consider sharing this with our community.
By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.
To get started and understand our policy, you can read our How to Write an Electrical Note.