Often document control is dictated by project requirements, for example a particular organisation may have an existing numbering system. Existing company...

If two dissimilar metals are touching and an external conducting path exists, corrosion of one the metals can take place.  Moisture or other materials...

I have been thinking recently that there appears to be less professional integrity around than when I first started my career in electrical engineering...

In the previous note we looked at the approach taken by the standard to the sizing of cables and illustrated this with an example.  We then looked at one...

The image (reproduced from IEC 60909) shows a typical fault in an ac system.  From the illustration it can seen that there is an initial dc component ...

Modelica is an open source (free) software language for modelling complex systems. Having never used it before, I thought I would download a development...

I think this post is going to be helpful to several of our readers. While the IEC low voltage circuit breaker Standard [IEC 60947-2, Low voltage switchgear...

Laplace transforms and their inverse are a mathematical technique which allows us to solve differential equations, by primarily using algebraic methods...

In a previous article I looked at the dc resistance of conductors and in this article we turn our attention to ac resistance. If you have not read the...

A load flow study is the analysis of an electrical network carried out by an electrical engineer. The purpose is to understand how power flows around...