Periodic Electrical Installation Inspection – How Often?

By Steven McFadyen on April 26th, 2012

Inspection of electrical installations on a periodic basis is essential to ensure the continued safety and reliability of such installations.

How often installations are inspected is up to the owner of the installation, provided such durations do not exceed any regulatory maximums in force. The criticality of the electrical installation to the continuation of the business, often determines how frequently the installation is inspected, for example many banks will carry out annual inspections of their installations. Other types of enterprise may do inspections more frequently and many installations are only inspected as often as required by regulation.

It is also possible, that different parts of an electrical installation are inspected with varying periods. Critical systems may be inspected more often than non-critical systems.

Depending where you live, it is likely that electrical installation regulations will exist, which will state the maximum duration allowable between inspections. For example in the IEE Wiring Regulations in the UK and the National Electric Code in the US, both deal how long an installation can be left without being inspected.

As an example in the UK, IEE Guidance Note 3, Inspection & Testing contains a table which gives the maximum allowable periods between inspections - offices, residential accommodation five years, leisure complexes, theatres three years, marinas, swimming pools one year, … , etc.

Now that the when has been covered, my second post will look at what should be inspected:

Periodic Electrical Installation Inspection – What to Inspect?

Testing, Electrical Installations, Commissioning

More interesting Notes:

Possibly related posts:

Steven McFadyen

Steven has over twenty five years experience working on some of the largest construction projects. He has a deep technical understanding of electrical engineering and is keen to share this knowledge. About the author

myElectrical Engineering

comments powered by Disqus

View 1 Comments (old system)

Eurotechworld says:

6/7/2012 7:11 PM

It is wonderful information and very helpful in business. Thanks for shearing this topic friend.

Third Party Inspection

Comments are closed for this post:

have a question or need help, please use our Questions Section
spotted an error or have additional info that you think should be in this post, feel free to Contact Us

Maximum Demand for Buildings

Estimating maximum demand is a topic frequently discussed. Working out how much power to allow for a building can be very subjective . Allowing too much...

Cable Sheath and Armour Loss

When sizing cables, the heat generated by losses within any sheath or armour need to be evaluated. When significant, it becomes a factor to be considered...

What is LED?

Light Emitting Diodes (LED ) are increasing gaining favour in both the domestic and commercial sectors; due to their efficiency, sustainability and durability...

How D.C. to A.C. Inverters Work

Traditionally generation of electricity has involved rotating machines to produce alternating sinusoidal voltage and current (a.c. systems). With the development...

Earth Electrode Resistance

Earthing of electrical systems is essential for the correct functioning and the protecting of life and equipment in the event of faults. The earth electrode...

Introduction to Lighting

When looking at the design of a lighting scheme it is useful to have an understanding on the nature of light itself and some of the basic theory associated...