Batteries 

By on

VoltaicPileBatteryA battery consists of  one or more cells, each of which use stored chemical energy to produce electrical energy, There are many types of cells and these are combined in a multitude of ways to produce the many battery types in use.

Batteries are divided in to primary and secondary:

  • Primary batteries – have an irreversible chemical action and can only be used once
  • Secondary batteries – have a reversible chemical action and can be recharged

The modern battery came into being due mainly to work carried out by Alessandro Volta at the end of the 18th century. He was able to make a cell by using silver and zinc discs sandwiched between  cardboard soaked in salt water.  By combining many cells in series he created what has become known as the Voltaic Pile.

Theory

When two dissimilar metals [electrodes] are placed in an electrolyte, ions will flow from the more reactive electrode to the other, building up charge.  This build up of charge is neutralised by the flow of electrons [current] in the circuit.

Splug.com (physics) have a good article which looks at the chemistry of how a cell works in more detail.  A link to the page is included below.

Approximate EMFs of Cells

Cell V
Bichromate 2
Bunsen 1.9
Dry cell 1.5
Daniell 1.08
Grove 1.8
Lead-Acid 1.85 - 2.2
Leclanché 1.46
Lithium Copper Oxide 1.7
Lithium Iron Disulfide 1.5
Lithium Manganese Dioxide 3.0
Lithium Ion 3.6
Mercury Oxide 1.35
Nickel Cadmium 1.3
Nickel Iron 1.4
Nickel Metal Hydride 1.2
Nickel Oxyhydroxide 1.7
Nickel Zinc 1.6
Silver Oxide 1.55
Zinc Air 1.35 – 1.65
Zinc Carbon 1.5
Zinc Chloride 1.5
Zinc Silver Oxide 1.8

Capacity (Ampere-hour)

Capacity measures the amount of energy stored in a battery.  In a battery, capacity is measured in ampere-hours (Ah).  This is the amount of amperes which can be drawn from the battery for one hour.  If a lower current is drawn the battery will last longer than an hour (conversely if more current is drawn it will last less).

In practice, varying terminal voltages, temperature and other factors make the assessment of capacity complex.

Internal resistance

Batteries are not perfect devices.  To understand their operation they can be modelled as a perfect voltage source (one with zero internal resistance) in series with an internal resistance. The voltage Vt at the terminals of a battery is given by:

myElectrical Equation

  • Voc is the open-circuit voltage of the battery
  • Ri is the battery's internal resistance
  • I is the current flowing through the battery

This can be rearranged to calculate the internal resistance given the other quantities:

myElectrical Equation

As the battery runs down and its internal resistance increases.  Consequently the voltage drop across the internal resistance increases and the terminal voltage decreases.

Battery Types

Alkaline Battery - invented by Canadian engineer Lewis Urry in the 1950s, alkaline batteries are a type of primary battery or rechargeable battery which utilizes alkaline as the electrolyte . Alkaline batteries have a higher output than many other battery types and account for the largest share to the battery market worldwide.

Common Consumer Battery Sizes

There are a vast number of battery types in use.  The table below lists the most common, which are used in everyday appliances.  For a more complete list, Wikipedia has a good page – see the external links section below.

Diagram  Size Capacity
(mAh)
ANSI
NEDA
IEC Diam.
(mm)
Height
(mm)
Mass
(g) 
  AAAA 625 1.5 25A LR8D425 8.3 42.5 6.5
battery1 N 1000 1.5 910A LR1 12 30.2 9
battery2 AAA 1250 1.5 24A LR03 10.5 44.5 11.5
battery3 AA 2850 1.5 15A LR6 14.5 50.5 23
  J 625 6 1412A 4LR61 prismatic 48.5 30
  9V 625 9 1604A 6LR61 prismatic 48.5 45.6
battery4 C 8350 1.5 14A LR14 26.2 50 66.2
battery5 D 20500 1.5 13A LR20 34.2 61.5 148

Notes: capacities are typical only.

Battery Life

Primary Batteries – naturally lose 8% to 20% per year at a temperature of about 20°-30°C due to self discharge.  Lowering the battery temperature (keeping in the fridge for example, can aid in reducing the self discharge.

Secondary Batteries – generally self-discharge quicker than primary batteries.  As batteries are recharged, they lose capacity – typical recharge cycles are in the range of 500 to 1000 charges.

Battery life can be seriously affected by temperature.  The link [effect of temperature on lead batteries], at the end of the article, explains this phenomena in detail.  

External Links



Steven McFadyen's avatar Steven McFadyen

Steven has over twenty five years experience working on some of the largest construction projects. He has a deep technical understanding of electrical engineering and is keen to share this knowledge. About the author

myElectrical Engineering

comments powered by Disqus



UPS Battery Sizing

Various techniques exist to enable the correct selection of batteries for UPS applications.  The procedure described below is one of the more common. ...

Meeting room of the future

The IET site has a video of a visit showing of a high tech meeting room developed at Napier University in Edinburgh. It a good demonstration of innovative...

How to refer fault levels across a transformer

Over the past year or so I've been involved in on going discussions related to referring fault levels from the secondary of a transformer to the primary...

Nikola Tesla

Nikola Tesla was born exactly at midnight on July 10, 1856 in the tiny village of Smiljan, Lika in Croatia. In his late teens, Tesla left the village to...

Lighting Design - An Introduction

From the earliest times, humans have found ways to create light. Pre-historic peoples used natural materials (moss, grass, etc.) soaked in animal fat and...

Magicians of Engineering

The other day I was reading 'Night of the New Magicians' by Mary Pope Osborn with my son.  The story is about a young boy and girl who travel back in time...

Fire Resistant and Fire Retardant Cables

Fire resistant and fire retardant cable sheaths are design to resist combustion and limit the propagation of flames. Low smokes cables have a sheath designed...

Power Transformers - An Introduction

One of the fundamental requirements of an alternating current distribution systems it to have the ability to change the magnitude of voltages.  It is more...

ABB Technical Guides - Motor Operation

ABB has produced a range of technical guides that offer concise explanations of the major technologies and technical issues in low voltage AC drives. ...

Three Phase Current - Simple Calculation

The calculation of current in a three phase system has been brought up on our site feedback and is a discussion I seem to get involved in every now and...

Have some knowledge to share

If you have some expert knowledge or experience, why not consider sharing this with our community.  

By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.

To get started and understand our policy, you can read our How to Write an Electrical Note