What is LED? 

By on

Light Emitting Diodes (LED ) are increasing gaining favour in both the domestic and commercial sectors; due to their efficiency, sustainability and durability.

How does an LED produce light and why is it so low energy?

LED are semiconductor devices, which work on the movement of electrons.  This movement of electrons converts the energy supplied to the LED into protons, producing light. This process is called electroluminescence.

Depending on the band of energy used by the semiconductor in the device, an LED can be a number of different colours and can be used in a variety of ways, from creating the infra-red beam in your TV remote, to providing white light for illuminating your home.

Low energy

Domestic LED bulbs designed for the retrofit market currently use between 3 and 8W of energy in comparison to the massive 35 - 50W of a standard Halogen bulb and are usually more efficient even than CFL lighting. The lifetime of an LED also makes it a more attractive low energy option, with some manufacturers quoting 50,000 hours.

Different types of LED light sources

COB

COB stands for Chips on Board and is a lighting systems that uses multiply LED chips grouped together to form a panel of light. These systems are compact but very bright and have a high thermal performance due to their aluminium base, which spreads out heat very efficiently.

SMD

SMD, or surface mount LED, are LEDs that are fitted onto circuit boards. These LEDs are normally tiny in size and are used for backlighting, on the dashboards of aircraft and for the lights on your keyboard. However, SMDs can also be mounted together to form enough light for a domestic bulb.

Luxeon

Luxeon LEDs are powerful white-light producers, which were first introduced in 1999, by the Lumileds Corporation of California. One of their main uses has been for the lighting of torches, with 5mm LEDs placed into groups to provide a strong beam. Unlike old tungsten filament torches, LED torches do not require heat to create their light, making them much more efficient.

CREE

The CREE Corporation, formed in 1987, California, provides a range of energy efficient LED lighting products. Like Luxeon LEDs they are also used to create strong, efficient torch beams, but CREE LEDs can come in a range of different colours and brightness for lighting the home inside and out.

OLED

An OLED is an organic lighting-emitting diode, and uses a film of organic material to produce its electroluminescence. The organic semiconductor is fitted between two electrodes, with OLEDs most often used to create clear digital images for the screens of portable game consoles, televisions, computers and mobile phones.

Other Factors

Constant Current Vs Constant Voltage

When switching to LEDs you may have to consider your transformers, as LED’s low wattage mean they are sometimes unable to meet the minimum 20W required by most standard transformers. The two types of drivers you can choose from are constant current and constant voltage. Constant current drivers are best used to power a single bulb or when running a number of bulbs in a series. When running numerous bulbs in parallel, a constant voltage driver is better.

LED colours and what they mean

The Kelvin scale measures colour temperature, which is connected to the quality of the lighting you receive. Even the colour white can have different colour temperatures and different colour quality; for example LEDs with a colour temperature of 3000K have a warmer white effect than white LEDs which have a temperature of 6000K, which creates a cooler white. Cooler white LEDs are most often used in a factory or commercial setting, with the warmer 3000k LEDs more suitable for the home.

The most energy efficient bulb - but what’s the cost?

LEDs are used for both commercial and domestic purposes in the form of backlights and bulbs, for use in screens, torches, lamps, dashboards and much more. Their initial cost may be steep in comparison to other light sources (around £15 for a bulb), but with 50,000-75,000 hours life years of guaranteed use, not to mention the lower energy consumption, LED lighting is most definitely the future.



Dan Ryan's avatar Dan Ryan

Dan Ryan works for Gil-lec, an Electrical Wholesaler based in the UK. About the author

myElectrical Engineering

comments powered by Disqus



Introduction to Traction Substations

Following on from my post on railway electrification voltages, I thought an introduction to traction substations would be a good idea. Traction substations...

Sony Pocket eBook Reader

For the past few years I have reading eBooks on my HTC touch phone. On and off I have debated buying an eReader and recently purchased a Sony PRS-300 ...

Skin Tapping Input

Tapping your forearm or hand with a finger could soon be the way you interact with gadgets. A new technology created by Microsoft and Carnegie Mellon ...

What is an Open Delta Transformer

In three phase systems, the use of transformers with three windings (or legs) per side is common.  These three windings are often connected in delta or...

Introduction to Lighting

When looking at the design of a lighting scheme it is useful to have an understanding on the nature of light itself and some of the basic theory associated...

Back to basics - the Watt (or kW)

When thinking about watts (W) or kilowatt (kW = 1000 W) it can be useful too keep in mind the fundamental ideas behind the unit. Watt is not a pure electrical...

Lead Acid Batteries

Lead acid batteries are cost effect and reliable, making them suitable for many applications.This note examines topics of interest associated with the...

Arc Flash Calculations

Working in the vicinity of electrical equipment poses an hazard. In addition to electric shock hazard, fault currents passing through air causes Arc Flash...

Power Factor

Power factor is the ratio between the real power (P in kW) and apparent power (S in kVA) drawn by an electrical load. The reactive power (Q in kVAr)...

What is Aircraft Ground Power

Ever wondered what kind of power an aircraft uses when parked at the airport stand. Normally the aircraft generates it own power, but when parked with...

Have some knowledge to share

If you have some expert knowledge or experience, why not consider sharing this with our community.  

By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.

To get started and understand our policy, you can read our How to Write an Electrical Note