Michael Faraday (the father of electrical engineering) 

By on

MichaelFaraday
Michael Faraday - the father
of electrical engineering
Famed English chemist and physicist Michael Faraday was born on September 22, 1791, in Newington Butts, a suburb of Surrey just south of the London Bridge. His family was not very well off and could only afford to give Faraday a basic education. When he was 14, Faraday was apprenticed to a bookbinder. Much of his learning came from reading the books he was binding.

At the age of 20, Faraday attended a series of lectures presented by English chemist Humphrey Davy. Faraday later wrote to Davy requesting a job as his assistant. He was turned down, but a year later Davy appointed him as a chemical assistant for the Royal Institution. Shortly after, Faraday was invited by Davy to accompany him on a European tour.

Upon his return, Faraday continued assisting with experiments at the Royal Institution. In 1821, he published his work on electromagnetic rotation, the theory that was used to create electric motors. In 1831, Faraday makes a significant discovery, the principle of electromagnetic induction. This principle was used to create the electric generator and transformer. This development was crucial in making electricity a practical and useful form of energy.

In the 1840s, Faraday's health began to deteriorate. He eventually died on August 25, 1867.

Faraday's contributions to science and his research on electricity made big leaps towards modern uses of energy and he is commonly regarded as the farther of electrical engineering. His name lives on as the "farad," a scientific term for a unit of electrical capacitance. A statue of Faraday stands in London, and there is a memorial of him placed near his birthplace of Newington Butts.

Faraday's life lived out, and continues to inspire one of his most famous quotes: "But still try, for who knows what is possible..."

Related Information



Steven McFadyen's avatar Steven McFadyen

Steven has over twenty five years experience working on some of the largest construction projects. He has a deep technical understanding of electrical engineering and is keen to share this knowledge. About the author

myElectrical Engineering

comments powered by Disqus

  1. tokks's avatar tokks says:
    11/14/2012 7:15 PM

    If he was born in 1971 how come he invented the elctro magnet in 1840

    • Steven's avatar Steven says:
      11/14/2012 7:38 PM

      It would have difficult for him. 1971 or 1791 - you can see how I did it. Thanks for pointing out the mistake tokks and I've corrected the date.


Comments are closed for this post:
  • have a question or need help, please use our Questions Section
  • spotted an error or have additional info that you think should be in this post, feel free to Contact Us



Frame Leakage Protection

While not as popular as it once was, frame leakage protection does still have some use in some circumstances.  In essence frame leakage is an earth fault...

Understanding Circuit Breaker Markings

IEC 60947 is the circuit breaker standard and covers the marking of breakers in detail. Any manufacturer following this standard should comply with the...

Equipment Verification (to IEC Standards)

One of the requirements to ensuring that everything works is to have equipment selected, manufactured and verified [tested] to IEC standards. Not all equipment...

8 Motor parts and common faults

Straight forward list of some common motor faults.  If I have missed any other common faults, please take a bit of time to add them in as a comment below...

Railway Electrification Voltages

This post is quick introduction and overview to different railway electrification voltages used in answer to a question sent in via email. While there...

Low Voltage Switchroom Design Guide

Low voltage (LV) switchrooms are common across all industries and one of the more common spatial requirements which need to be designed into a project...

How to Check a Circuit is Dead

If you want to check a circuit is dead (not live), you should always use the three point method. First check a known live circuit, then check the dead...

Fault Calculations - Typical Equipment Parameters

A frequent problem in fault calculations is the obtaining of equipment parameters.  While it is always preferable to use the actual parameters of the equipment...

myElectrical - Cable Sizing Tool Upgrade

Our IEE cable sizing was wrote a few years ago and had become rough around the edges. I thought it was time to give the tool a service. Unfortunately when...

Occam's Razor

I was reminded of Occam's Razor while reading a book. It's quite a simple principal of logic which has stood the test of time and is accepted as central...

Have some knowledge to share

If you have some expert knowledge or experience, why not consider sharing this with our community.  

By writing an electrical note, you will be educating our users and at the same time promoting your expertise within the engineering community.

To get started and understand our policy, you can read our How to Write an Electrical Note.